The firewood is required by all people because they can help in keeping your house warm during the shivering winter season. There are various other benefits of firewood. The firewood can also light up your house during power outages.
Moreover, it offers a cost-efficient way to heat your place. Firewood also provides you an opportunity for a family to get together during the winter season. You can also use firewood for a bonfire at the party.Â
RELATED ARTICLE || indian Pharmaceutical Companies can Touch US$50 Billion by 2020: A Reflection
A heavy storm, wind, and earthquake can lead to the falling of a tree in your yard. You can transform this tree into useful firewood. Here, in this post, we will discuss various ways to convert the fallen trees into firewood:
1. Start Doing Preparation
Tools –
First of all, you have to arrange all tools that will help in splitting logs into small pieces of firewood. You must have maul in your toolbox to convert the fallen tree into firewood.
Maul is a tool that appears like a combination of axe and sledgehammer.
It is one of the best tools to split the log into firewood. Mauls are available in different sizes. It is recommended to choose a 6 to 8-pound maul to get the desired results. You must also have a chainsaw sharpener to sharpen the blade of the chainsaw.
The chainsaw with a sharp blade helps in saving your precious time and energy. It is recommended to choose a 16-inch chainsaw for optimum operation. Do not forget about the chopping block. This block must be 16 inches high, and the diameter should be 12 inches.
Team Members-
Never do this task alone because it involves risk. Thus, you should carry at least one person along with you who can help you in this wood cutting task.
Right Location-
You must pick the right location for this task. It is important to make sure that you do this task in a spacious and cool area. You should also ensure that the location you choose must have proper airflow so that you stay cool and comfortable while performing this task.
Safety Gear –
It is imperative to wear safety gear while doing this task. You must wear high-quality gloves, eye protection gear, and loose-fitting clothes.
Check Out || Top Reason To Consider The Nissan Qashqai
2. Start Cutting Tree
You should start by cutting all branches of the tree with a chainsaw. First of all, divide the entire tree into 3 m logs. When you cut the entire tree into three different logs, then you can easily take them to the splitting location without any problem.
If the length of the wooden log is larger, then you must have large storage space. On the other hand, if the wooden log has a shorter length, then a small storage space would be sufficient.
Moreover, the shorter size log can be easily split into different pieces. It is recommended to cut tree branches into logs of length 16 to 20 inches. Approximately 40 to 50 cms of wooden logs are suitable for fireplaces.
3. Start Splitting the Logs
The log splitting task is a little difficult and it requires a special technique. You can also take help from a tree service provider. North shore Sydney contractors offer free firewood Sydney services.
Step 1:
First of all, place a block on the flat surface. Make sure that the block is stable. After this, you have to place the wooden log over the flat block.
Step 2:
After that, you have to search the hairline crack on the wooden log. You have to run your blade over this crack. It will make your task simple and faster as well. Moreover, it will save energy. Now, you have to mark the location on the log where you have to cut it.
Step 3:
Now hold the maul firmly and put your left hand at the end of the handle and the right hand at the head of this tool. After that, you have to slightly bend your knees and start cutting a log with the Maul. You should safely use maul because even a small mistake can lead to a big injury.
You have to keep going until you get the right result. You should do this task with full strength. But the right method also plays a vital role. You must learn the right technique before starting working with Maul.
Step 4:
In case maul stuck inside the crack of the log, then take a rock and use it to get the Maul out of the log. Now, start hitting log again with the maul.
Step 5:
You have to stop splitting logs when you get the appropriate size firewood. Now, you have to take the split wood to the store. Now, you can store your firewood in the storeroom to protect it from rain and moisture. It is important to keep your firewood dry and free from moisture.